Made to order

A1 Snap Frame A-Frame

A1 posters · Silver or black

A snap frame A-frame for the footpath, shopfront or foyer, in a silver or black frame. Each side is a poster frame: snap open the four edges, lay in your A1 poster with its clear cover, and snap them shut. No tools, and it takes under a minute.

It is double-sided, so people see your message from both directions, and each side can carry a different design. Posters are printed in-house in Adelaide with water-based latex inks and sit behind a clear protective cover.

When your offer changes, keep the frame and just order new posters. The frame is light enough to carry in at night and heavy enough to stay put in normal weather.

Our customers mostly use it for cafés, shops and salons; real estate open homes; and markets, events and pop-ups. There are 3 ways to order: frame with two posters (ready to put outside), spare posters (a new message for the frame you already have) and frame only (if you print your own posters). Each one is listed below with its sizes and details, and you can add more than one to the same quote. Each job is made to order, so tell us your date and we will let you know straight away if it works.

How we print it

Water-based latex printing

We print the posters for this A-frame in-house in Adelaide on an HP Latex R2000, a large-format printer for rigid boards and roll media that uses water-based inks instead of UV or solvent.

  • Water-based inks

    Printed on our HP Latex R2000 with water-based HP Latex inks. No UV-cured or solvent inks.

  • UL ECOLOGO® certified inks

    The inks are certified to UL 2801, which covers a range of human health and environmental criteria.

  • UL GREENGUARD Gold certified inks

    The inks are certified to UL 2818 for low chemical emissions, so prints suit indoor spaces as well as outdoors.

  • Odourless prints, no HAPs

    Prints come off the printer dry and odourless, and the inks contain no hazardous air pollutants.

The certifications are held by the HP Latex inks, as published by HP for the HP Latex R2000. They describe the inks, not Kooka Printing Hub or each finished sign. Some board and vinyl materials have an odour of their own. HAPs: per EPA Method 311.

How we cut it

Cut in-house, cut to shape

Every board is cut in-house on our digital flatbed cutter: knife cut to shape or to clean rectangles, router cut for solid boards, and laser cut for acrylic.

  • Cut to any shape

    Our digital flatbed cutter follows the outline of your artwork, so circles, arrows, logos and custom shapes come out exactly where the print is.

  • Clean, square edges

    Rectangles are machine cut straight and square, with no hand trimming and no rough edges.

  • Router cut solid boards

    Solid materials such as ACM, foamed PVC and acrylic are routed for smooth, clean edges, holes and cut-outs.

  • Laser cut acrylic

    Acrylic is laser cut, which leaves a smooth, polished edge straight off the machine, even on fine detail.

  • Faster turnaround

    Printing and cutting both happen in-house in Adelaide, so your job goes straight from our printer to our cutter. Nothing is sent away.

Options & sizes

Pick a size and quantity, add as many as you like, then send one quote request. Not sure? Tell us how you’ll use it and we’ll recommend the best fit.

Frame with two posters

Ready to put outside

Poster size
A1 (594 × 841 mm), one each side
Frame colour
Silver or black
Posters
Printed full colour; each side can be a different design
Cover
Clear protective cover over each poster
How it changes
All four edges snap open and shut
Choose size & quantity

How many do you need?

Spare posters

A new message for the frame you already have

Size
A1 (594 × 841 mm)
Print
Full colour, water-based latex inks
Choose size & quantity

Enter a quantity for each size you need.

Frame only

If you print your own posters

Frame
Double-sided snap frame A-frame with clear covers
Frame colour
Silver or black
Choose size & quantity

How many do you need?

Questions about A1 Snap Frame A-Frame

How long does A1 snap frame a-frame take?

It’s made to order, so the time depends on the job. We’ll tell you straight when it will be ready when we quote.

Can you design the artwork for me?

Yes. Our in-house designers can create your artwork from scratch or fix a file you already have. You’ll see a proof before anything prints.

What file should I send?

A print-ready PDF at final size with 3 mm bleed is best. High-resolution JPG or PNG also works. Not sure? Send what you have and we’ll check it.

Can I pick up my order?

Yes. Collect from 736 North East Road, Holden Hill SA 5088, or ask us about delivery.

Popular uses

Great for

  • Cafés, shops and salons
  • Real estate open homes
  • Markets, events and pop-ups
Good to know

Before you order

  • Centre the poster and cover. Line them up before you snap the edges shut so the frame grips all four sides.
  • Check with your council. Many councils have footpath rules about where a sign can stand and how much clear path to leave.
  • Bring it in overnight. It keeps the sign and posters in good shape and out of the weather.
  • Artwork ready? PDF at final size with 3 mm bleed is ideal. No artwork? Our designers can create it.
Rigid Signs

You might also like

See all
Usually ready in 24 hrs

Election Signs

Weatherproof corrugated plastic (often called corflute) signs with stakes or ties. Printed fast when deadlines are tight.

Make your mark.

Send your artwork through and we’ll take a look. Most jobs are ready within 24 hours.