Printed metal A-frame
Permanent artwork, both sides
- Panel sizes (W × H)
- 600 × 900 mm or 900 × 1200 mm
- Panels
- 3 mm aluminium composite, printed full colour
- Frame
- Powder-coated metal
- Sides
- Printed both sides; each can be a different design
600 × 900 · 900 × 1200
Our most solid A-frame. A powder-coated metal frame carries a printed 3 mm aluminium composite panel on each side, fixed with high-bond tape so there are no screws or rivets showing across your artwork.
It is waterproof and built to live outside your door: light enough to carry in at night, heavy enough to stay put in normal weather. Choose this one when your message will not change often and you want it to look sharp for years.
Our customers mostly use them for shopfronts and showrooms; restaurants, bars and cafés; and car yards, clinics and offices. Panel sizes (W × H): 600 × 900 mm or 900 × 1200 mm. The full details are listed below. Each job is made to order, so tell us your date and we will let you know straight away if it works.
Sizes, board and fittings depend on where the sign will stand and how long it needs to last. Send a few details with your quote request and we will recommend the best fit, set up or check your artwork, and send a proof before printing.
We print the panels for these A-frames in-house in Adelaide on an HP Latex R2000, a large-format printer for rigid boards and roll media that uses water-based inks instead of UV or solvent.
Printed on our HP Latex R2000 with water-based HP Latex inks. No UV-cured or solvent inks.
The inks are certified to UL 2801, which covers a range of human health and environmental criteria.
The inks are certified to UL 2818 for low chemical emissions, so prints suit indoor spaces as well as outdoors.
Prints come off the printer dry and odourless, and the inks contain no hazardous air pollutants.
The certifications are held by the HP Latex inks, as published by HP for the HP Latex R2000. They describe the inks, not Kooka Printing Hub or each finished sign. Some board and vinyl materials have an odour of their own. HAPs: per EPA Method 311.
Every board is cut in-house on our digital flatbed cutter: knife cut to shape or to clean rectangles, router cut for solid boards, and laser cut for acrylic.
Our digital flatbed cutter follows the outline of your artwork, so circles, arrows, logos and custom shapes come out exactly where the print is.
Rectangles are machine cut straight and square, with no hand trimming and no rough edges.
Solid materials such as ACM, foamed PVC and acrylic are routed for smooth, clean edges, holes and cut-outs.
Acrylic is laser cut, which leaves a smooth, polished edge straight off the machine, even on fine detail.
Printing and cutting both happen in-house in Adelaide, so your job goes straight from our printer to our cutter. Nothing is sent away.
Pick a size and quantity, add as many as you like, then send one quote request. Not sure? Tell us how you’ll use it and we’ll recommend the best fit.
Permanent artwork, both sides
It’s made to order, so the time depends on the job. We’ll tell you straight when it will be ready when we quote.
Yes. Our in-house designers can create your artwork from scratch or fix a file you already have. You’ll see a proof before anything prints.
A print-ready PDF at final size with 3 mm bleed is best. High-resolution JPG or PNG also works. Not sure? Send what you have and we’ll check it.
Yes. Collect from 736 North East Road, Holden Hill SA 5088, or ask us about delivery.
A double-sided snap frame A-frame. Snap the edges open, drop in a new A1 poster and snap them shut.
Free-standing cut-outs and displays for shop floors, events and launches. Life-size is no problem.
Printed cards with a fold-out stand for counters and windows. Simple, cheap and very effective.
Weatherproof corrugated plastic (often called corflute) signs with stakes or ties. Printed fast when deadlines are tight.
Send your artwork through and we’ll take a look. Most jobs are ready within 24 hours.